
What a baffle filter does
A baffle filter is a stainless steel grease filter in a canopy. Air is forced through angled plates; grease cannot follow the turns and runs off through drainage holes into collecting trays. Because it is non-grease-loading, it does not clog like a mesh filter, and its interlocking baffle walls restrict the passage of flames into the ductwork.
Check the size
Measure the housing, not the old filter, since an old filter may be damaged or the wrong size. Our standard baffle filter is 500mm high x 500mm wide x 50mm deep, and other sizes are available. A filter that is too small leaves gaps that let grease bypass it.
Check the material and build
Stainless steel is standard for commercial canopies. HSE guidance in CAIS10 says grease filters need to be easy to remove for cleaning or replacement. Look for rigid frames, smooth surfaces and drainage holes that are not blocked.
Check the housing and fit
A filter is only as good as the housing it sits in. Bent frames, missing seals or sagging drawers let air and grease bypass. Our canopies include a full-length grease filter housing with removable drawers for easy access. See extraction canopies.
Cleaning and replacement
Clean filters regularly; how often depends on how heavily you cook. Many kitchens wash them in a commercial dishwasher, following the manufacturer's instructions. Replace filters that are bent, corroded or no longer sit properly. See baffle filters.
Common mistakes when buying filters
- Measuring the old, damaged filter instead of the housing.
- Ordering the right face size but the wrong depth.
- Mixing filter types in one canopy.
- Leaving gaps by omitting a filter to "improve airflow".
- Ignoring a bent or corroded housing that lets grease bypass the new filters.
If in doubt, send a photograph and a measurement of the housing and we will advise.
Keeping a spare set
Many kitchens keep a spare set of filters so that one set can be washed while the other is in use, which keeps the canopy protected at all times. Label the sets, store them clean and replace them as a pair when they wear. It is a small cost that avoids running without filters, which should never happen.
Buying replacements
You can order replacement filters on their own or as part of a full design and installation. If you are unsure of the size, send photographs and a measurement of the housing. Read supply-only versus supply and install.
Sources and further reading
Independent references we used, so you can check the rules yourself:
- HSE: Ventilation in catering kitchens (Catering Information Sheet 10)
- BESA (Building Engineering Services Association)
Frequently asked questions
What size are standard baffle filters?
Our standard is 500mm high x 500mm wide x 50mm deep; other sizes are available.
How often should baffle filters be cleaned?
It depends on how heavily you cook. Heavily used kitchens clean more often; follow the manufacturer's guidance and your own risk assessment.
When should I replace baffle filters?
When they are bent, corroded, damaged or no longer fit the housing.
Can I buy filters without a canopy?
Yes. We supply replacement baffle filters on their own.
