50+ years' trade experience Installing across the UK
Menu
Home
About
About UsWhy Choose UsCase StudiesHealth & SafetyEnvironmentCS Group
Services
Kitchen Extraction SystemsExtraction Canopies & FiltersCommercial Air ConditioningCommercial VentilationMaintenance & ServicingGas Interlock SystemsKitchen Extract DuctworkBaffle FiltersStainless Steel Wall CladdingMake-Up Air SystemsKitchen Odour Control
Sectors
All SectorsCommercialLeisure & RestaurantsTakeaways & Fast FoodHotels & HospitalityPubs & BarsHospitals & Healthcare CateringIndustrialPublic SectorEducationRetail
More
BlogContact
Maintenance

When Should You Replace a Commercial Kitchen Extraction System?

Repair or replace? The signs a commercial kitchen extraction system has reached the end of its useful life, and how a survey decides the best fix.

When should a commercial extraction system be replaced?

Replace a commercial extraction system when repairs keep recurring, the canopy, ductwork or fan are damaged or corroded, it no longer matches your appliances or menu, it cannot meet current requirements, or running costs and noise are unacceptable. A survey that measures airflow and inspects condition shows whether repair or replacement is better value.

Last updated

Maintenance13 Nov 20267 min read
When Should You Replace a Commercial Kitchen Extraction System?

Repair or replace?

Extraction systems can run for many years if they are well designed and maintained, but not indefinitely. The decision is rarely about age alone. It is about whether the system still does its job safely, comfortably and compliantly at a reasonable cost.

Signs it may be time to replace

  • The canopy is dented, corroded or no longer sits properly.
  • Ductwork is damaged, heavily greased or cannot be cleaned because it has no access.
  • The fan is noisy, vibrating or repeatedly failing.
  • The kitchen is hot, smoky or smelly even with clean filters.
  • The gas interlock keeps tripping or has been bypassed.
  • Your cooking line has changed and the system was never sized for it.
  • You cannot show design or commissioning records.

Changes that overload an old system

Adding a fryer, grill, wok range or charcoal oven, expanding the menu or increasing covers can overload a system designed for lighter use. HSE advises that where design data is absent for an existing installation, the installer should recommission the system and produce a report on its performance (CAIS10). A survey will show whether the existing canopy, fan and make-up air can cope.

Compliance and planning

If the system pre-dates current guidance or planning conditions, it may not meet them. A change of use or refit can trigger new requirements; see kitchen extraction regulations and planning permission.

Partial replacement

You do not always need to replace everything. Replacing filters, adding make-up air, fitting access doors, changing the fan or adding odour control can restore performance at lower cost. A survey identifies the most cost-effective route.

A simple repair-or-replace test

Ask four questions. Does the system still do its job safely and comfortably when clean and serviced? Can the canopy, ductwork and fan still be cleaned and maintained? Does it still match your appliances and menu? Do repair costs and downtime now exceed a sensible share of the cost of replacement? If the answer to any of the first three is no, or the fourth is yes, ask for a survey and a comparison of options.

Next step

Ask us to survey the kitchen: we measure airflow, inspect the canopy, ductwork and fan and recommend repair, modification or replacement. See kitchen extraction systems and our maintenance service.

Sources and further reading

Independent references we used, so you can check the rules yourself:

Frequently asked questions

How long does a commercial extraction system last?

There is no fixed life; it depends on design, use and maintenance. Condition and performance matter more than age.

Can I just replace the fan?

Sometimes, if the rest of the system is sound and the fan is the cause. A survey will confirm.

Do I need new drawings if I replace the system?

Yes. A replacement should be designed and commissioned, with records, rather than copied from the old one.

Can you survey an existing kitchen?

Yes, anywhere in the UK.

Need this sorted on site?Talk to our team: survey, quote and install anywhere in the UK.
Call 07759 696007
Keep reading

More from the blog

Planning a kitchen or air conditioning project?

Tell us where your site is and what you need. We survey, design, manufacture, install and maintain across the UK.

WhatsApp us
Call Now Get Quote